1. Laths, not of metal

2. They have to be precisely lathed.

3. Parquet flooring and laths of wood

4. Laths, not of metal: arbours (buildings)

5. Wainscotting, laths and duckboards of metal

6. He's as thin as a lath.

7. you'll need corrosion-resistant metal stucco lath.

8. A as thin as a lath women.

9. X precipitate phase and the lath structure.

10. Tremolite laths and serpentine minerals are present in places.

11. The little boy was as thin as a lath.

12. Floating floor with controlled sonority, modified bitumen sheet and laths therefor

13. Long strips of ceiling lath sheared down into the rooms.

14. Lath Length: up to 2440 mm or customized according to customer requirements.

15. In welding zone the lath shape microstructure reduces, and equiaxed microstructure increases.

16. Metal lath and beads - Definitions, requirements and test methods - Part 2: External rendering

17. Granular or lath be-bainite was formed in as-welded metal.

18. Metal lath and beads — Definitions, requirements and test methods — Part 2: External rendering

19. I was shocked at his appearanceso grey - faced , and thin as a lath.

20. Bandsawed, KILN DRIED LUMBER • SASH, DOORS, MILL WORK WASHINGTON FIR LATH NO

21. He devised metal lath and corner trim long before it became standard.

22. application in buildings or other construction projects of interior and exterior plaster or stucco, including related lathing materials

23. Lath-shaped Antigorite fibres with transitions to fine fibrils (from keelinG et al

24. — application in buildings or other construction projects of interior and exterior plaster or stucco, including related lathing materials.

25. 13 The lath like carbide free ferrite and retained austenite has been observed by transmission electron microscope.

26. The window through which Solomon looks out has a lattice —apparently a framework with laths and perhaps elaborate carvings.

27. Building materials (non-metallic) for shielding electric and/or magnetic fields, in particular cloth lath

28. Lath-shaped plagioclase is Albite in composition and pyroxene has been mainly replaced by tremolite

29. We'll have no Cupid hoodwink'd with a scarf, Bearing a Tartar's painted bow of lath,

30. Alternatively a layer of aluminium-coated adhesive cloth tape is directly attached to the underside of the lath.

31. Interior Surfaces Gypsum Board Furring and Lathing Non-load Bearing Wall Framing Acoustical Suspension Gypsum Plaster Ceramic Tile Quarry and Paver Tile Acoustical Ceilings

32. A framework consisting of crossed strips of wood, or laths, forming a network and generally used to cover a window.

33. The thickness of the wood lath Clean Crawls uses is typically 50% to 100% thicker than the standard wood

34. look toward the lathing overhead, made a bold gesture thitherward; and straightway, to his complete discomfiture, received the whole contents in his ruffled bosom.

35. I found this lath back by far the most comfortable and remarkable, its size being ideal for my build.

36. Warm and full with subdued, discreet brightness, the Paiste 900 Series Medium Even Cymbal set is an affordable option for hand-hammered and lathed Cymbals

37. Brick and Stone Mason Cement (concrete ) Finisher Construction Boilermaker Construction Craft Worker Construction Millwright Drywall Finisher and Plasterer Drywall, Acoustic and Lathing Applicator Electrician:

38. Roofing battens or Battening, also called roofing lath, are used to provide the fixing point for roofing materials such as shingles or tiles

39. Roofing Battens or battening, also called roofing lath, are used to provide the fixing point for roofing materials such as shingles or tiles

40. But these are all landsmen; of week days pent up in lath and plaster -- tied to counters, nailed to benches, clinched to desks.

41. Clean Crawls again goes above and beyond by purchasing specially-cut thick lath that is also longer than what others use

42. This paper focuses on the NC grinding of the shaped joint, then presents a design of the CNC special grinding machines based on the CNC lathing-milling center.

43. A traditional Adhered masonry system includes a substrate with one or two layers of a weather resistant barrier (WRB) on the substrate’s outside face, a metal lath securely fastened to the substrate, a “scratch” or base mortar coat that completely encapsulates the metal lath, a top mortar coat, and a masonry veneer Adhered by a top coat to the scratch coat.

44. As the carbon content increases, the Cementite filaments become more continuous, and at high carbon contents, the bainitic ferrite laths are finer with the Cementite stringers more numerous and more continuous

45. In lathing I was pleased to be able to send home each nail with a single blow of the hammer, and it was my ambition to transfer the plaster from the board to the wall neatly and rapidly.

46. When B-III and B-II type bainite, which precipitated Acicularly so as to partition prior austenite grains, associated with lath martensite, a detrimental effect was found on the strength and

47. “The furnace room is to be Ceiled with metal lath and metal doors into this room will be substituted for those now in use, thus rendering the furnace room practically fire proof.

48. Other articles where Cementite is discussed: iron processing: …carbide (Fe3C), also known as Cementite, is formed; this leads to the formation of pearlite, which in a microscope can be seen to consist of alternate laths of alpha-ferrite and Cementite

49. Ceiled Sentence Examples The parent chamber and the ambulatory were Ceiled, sometimes with interlacing strips of bark or broad laths, so as to produce a plaited effect sometimes with plain boards. Ceiled roof showing exposed tie beams supported on corbels and short braces

50. Roofing battens or Battening, also called roofing lath, are used to provide the fixing point for roofing materials such as shingles or tiles.The spacing of the battens on the trusses or rafters depend on the type of roofing material and are applied horizontally like purlins.

51. Roofing Battens or battening, also called roofing lath, are used to provide the fixing point for roofing materials such as shingles or tiles.The spacing of the Battens on the trusses or rafters depend on the type of roofing material and are applied horizontally like purlins.

52. Ladders and scaffolding of metal, pot hooks of metal, stair treads (steps) of metal, running boards and nosings of metal, sills of metal, staircases of metal, wainscotting and laths of metal, awnings of metal, cornices and angle irons of metal, clothes hooks of metal, tubing, roofing of metal and wire gauze

53. He calls it 'Battening of the hatches' but it is clearly the same expression: “Battens of the hatches: Long narrow laths serving by the help of nailing to confine the edges of the tarpaulins, and keep them close down to the sides of the hatchways in bad weather.”

54. These weld metals have microstructures of acicular ferrite (16') interspersed in a hard constituent (11'), such as lath martensite, yield strengths of at least about 690 MPa (100ksi), and DBTTs lower than about -50°C (-58°F) as measured by a Charpy energy versus temperature curve.

55. Ladders and scaffolding, not of metal, stair treads (steps), not of metal, running boards and nosings, not of metal, sills, not of metal, staircases, not of metal, wainscotting and laths, not of metal, awnings, not of metal, cornices and angle irons, not of metal, clothes hooks, not of metal, tubing, roofing and gauze, not of metal

56. ‘The assembly of the whole structure (including the Ashlaring and the assembly laths for the tile) will last, taking into account the size of the house, between 3 and 5 days.’ 2 Upright boarding fixed from the joists to the rafters of an attic to cut off the acute angle between the roof and the floor.

57. Working of wood not provided for in subclasses B27B to B27L, e.g. by stretching [2] Manufacture or reconditioning of specific semifinished or finished articles (features of copying devices B23Q; manufacture of plywood or veneer, shaping plywood or veneer into articles B27D; of central layers for plywood B27D 1/00; nailing or stapling machines in general B27F 7/00; of elements for cooperage or wheel-making B27H) . of roofing elements, e.g. shingles . of flooring elements, e.g. parqueting blocks (assembling wooden elements on backings of other substances B32B, e.g. B32B 37/00) . of specially-shaped wood laths or strips . of airscrew blades . of railings, stairs, stair stringers, ladders, or parts thereof . of railroad sleepers